RatBikeZone BBS

Nate

Any reason why I can't make U-Clamps out of studding?

Sun Jan 20 2008 16:58 GMT; 82.16.3.***

...got a few lengths of threaded rod laying about, just thinking that if I bend it onto U-Shape bits and put a bit of flat bar across the bottom, I could make it into U-Clamps.

you can buy beam clamps which are essentialy that * -- joethewelshboy, Sun Jan 20 2008, 17:13
Slide two pipe nipples over the parts you want straight -- Poodle Head Mikey, Sun Jan 20 2008, 17:13
Done that myself -- Pigeon, Sun Jan 20 2008, 17:01
- Just want to clamp my box section luggage rails onto the bike * -- Nate, Sun Jan 20 2008, 17:12
  - Go for it then -- Pigeon, Sun Jan 20 2008, 21:40
    - Ben toying with that idea myself, as both bars are square... -- Nate, Sun Jan 20 2008, 22:36

Back to: List of Messages

rat rod decals biker t-shirts chopper wear

© 2002..2008 www.ratbike.org